HPI SAVAGE FLUX HP

Categories: , Tags: ,

Product Description

This is the brushless electric powered, 2.4GHz radio controlled, ready to run
1/8 scale HPI Savage Flux HP Monster Truck.

FEATURES

Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098"
(2.5mm) thick, extra low CG for high degree of control and
cornering ability, included wheelie bar, twin battery boxes hold a
variety of battery types
Drive: Four wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm
shaft, handles up to 25V of power, held in place with two machined
8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
aluminum motor mount
Radio: HPI TF-45 2.4GHz
Electronic Speed Control: ELC 6S, waterproof, proportional brake
handles up to two 3S LiPo batteries, preinstalled cooling fan and
Dean's connectors
Steering Servo: SB-5 Metal Gear Servo 11.8kg-cm 6.0V (HPIM1996)
Transmission: All metal gears running on rubber-sealed ball bearings
Differential: Equipped with machined super heavy duty bevel gears,
upgradeable with all nitro Savage option parts
Spur Gear: Machined steel, 44 tooth
Suspension: Uprights designed for the larger tires and weight of the
Savage XL
Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 3.3" (83mm)
diameter
Tires: GT-2 on/off-road with blocky tread pattern and heavy-duty
sidewall teeth, 6.3" (160mm) diameter, 3.4" (86mm) wide
Shocks: Big Bore nylon bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Body: Trimmed and painted GT-2

INCLUDES

Assembled 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork
2200 brushless motor, ELC 6 ESC, HPI 2.4GHz radio system, SF-5
high torque metal gear steering servo, painted & trimmed body,
wheelie bar, instruction manual and HPI RC Cars DVD

REQUIREMENTS

AA Batteries: Six for transmitter
Batteries:** Two NiMH (up to 8-cell flat or stick packs) with Deans
connectors, or 2S or 3S LiPo hard case battery packs, 25C minimum
(both batteries must be the same type, voltage and capacity)
Battery Charger: Depending on type of batteries selected
Building and track equipment

SPECIFICATIONS

Vehicle-
Length: 21" (533mm)
Width: 16.8" (427mm)
Height: 10" (254mm)
Front and Rear Track: 16" (406mm) outer edges of tires, side to side
Front and Rear Tread: 13.1" (332.5mm) center of tires, side to side
Wheelbase: 13.6" (345mm)
Body-
Length: 19.2" (487mm)
Width: 8.5" (216mm)
Height: 5" (127mm)

Additional Information

Brands

HPI

Reviews

There are no reviews yet.

Be the first to review “HPI SAVAGE FLUX HP”

Baja Hobbies

Baja Hobbies